IDS 400 User Manual

IDS Base Station Receiver 400 700-179-02B Issued January 2009 17
• Press the # key (cancel alpha mode) to return to the numeric mode.
3.2.2
3.2.23.2.2
3.2.2 Viewing Events in the Log
Viewing Events in the LogViewing Events in the Log
Viewing Events in the Log
The event log holds 700 system and panel reported events. These may be viewed by pressing the scroll
down 6 key when at zero un-viewed events and then use 6 or 5 to navigate through the
event log. Use the date and time as a guide to locate a specific, i.e. a “Comms Restored” that occurred
at some approximate time. The event log is a circular buffer, as depicted below, and you may scroll
between the latest event and the oldest event.
699 698 697 696 695 ~ 4 3 2 1 0
Scroll between these points
Latest Event
Oldest Event
Next Event
The following are aides to speed up the scrolling through the event log.
3.2.2.1
3.2.2.13.2.2.1
3.2.2.1 GOTO nth Event
GOTO nth EventGOTO nth Event
GOTO nth Event
This feature enables you to go to any event 000 to 699 in the event log. Press the # key and the un-
viewed event icon, UVE = e.g. 100, changes to GOTO, then:
03 DEC 2000 16:48
LCx CONT ID ACCT
CID Plain Library
Event QXYZGGCCC GOTO
Press * key to select this function, the GOTO icon changes to G_--.
03 DEC 2000 16:48
LCx CONT ID ACCT
CID Plain Library
Event QXYZGGCCC G_--
Enter the number of the event locality you want to go to, e.g. 699, 000, 123, and press * to move to
the 123
rd
event.
03 DEC 2000 16:48
System MSG
System Reset
123

IDS 400 Specifications

General

Brand	IDS
Model	400
Category	Receiver
Language	English