IDS 400

IDS Base Station Receiver 400 700-179-02B Issued January 2009 11
2.2.2
2.2.22.2.2
2.2.2 IDS BSR Installation
IDS BSR InstallationIDS BSR Installation
IDS BSR Installation
The full installation is illustrated below, for alternate configurations omit the equipment not required from
the list above and from the installation below.
Figure 4: IDS BSR Connection Diagram
2.2.3
2.2.32.2.3
2.2.3 Installing the Batter
Installing the BatterInstalling the Batter
Installing the Battery
yy
y
The battery is shipped separately to prevent any damage due to its weight. To install the battery read the
following instructions:
IDS BSR400
IDS BSR400IDS BSR400
IDS BSR400
:
 Remove the top cover.
 Place the battery into the battery holder assembly.
 Locate and connect the red and black battery cables to the battery.
32VA 16V IDS Wall
Mount Supply
Telkom Lines
Tel
k
om
P
C Alarm
Monitor, Sout
Parallel Printer,
Pout
P1
D1
L1...4
Remote
Relay
Operated
Event
Alarm
Alarm
Panel
R1
T