IDS 400 User Manual

IDS Base Station Receiver 400 700-179-02B Issued January 2009 43
50x – 51x 0 8-1 System Disables
52x 0 8-2 Sound/Relay Disables
53x – 54x 0 8-3 System Peripheral Disables
55x – 56x 0 8-4 Communication Disables
57x 0 8-5 Bypasses
60x – 63x 0 8-6 Test/Miscellaneous
NOTE:
For the full Contact ID event code “Plain Library” see Appendix B
4.5.5
4.5.54.5.5
4.5.5 SI
SISI
SIA Tagged Buzzer Events M306
A Tagged Buzzer Events M306 A Tagged Buzzer Events M306
A Tagged Buzzer Events M306 M307
M307M307
M307
The SIA protocol has a fixed two digit alphabetic event code format, Ax to Zx, which is arranged into 26
groups. The most significant digit is used as the group identifier, Ax...Zx, and is used in the table to select
the tagged events. These are arranged into two tables, Ax to Px and Qx to Zx. To disable or enable the
buzzer/relay on a particular event group from Table 10: Contact ID Group Event Codes enter a 0 or 1 to
correspond with the code group in Table 8: Contact ID [10x...42x] Event Type Buzzer Enable and Table 9:
Contact ID [44x...63x] Event Type Buzzer Enable that corresponds to the header field above the entry
field, the default selection is shown below.
Table 11: SIA [Ax..Px] Event Type Buzzer Enable
Group A B C D E F G H I J K L M N O P
Tag 1 1 1 1 0 1 1 1 0 0 0 0 1 0 0 0
Table 12: SIA [Qx...Zx] Event Type Buzzer Enable
Group Code Q R S T U V W X Y Z
Tag Value 0 0 0 0 0 0 0 0 0 0
Contact ID tagged field 1 example:
ALARM EVENTS
Tagged SIA 1
(1111000101100000)
Press *
ALARM EVENTS
ABCDEFGHIJKLMNOP
(1111000101100000)
_---------------
Press 5 until the “Header” number to be changed is reached and enter the new tag value. Press
6
or 5 to select other header fields. Press 5 until the last field then press * to save
and end entry process.

IDS 400 Specifications

General

Brand	IDS
Model	400
Category	Receiver
Language	English