IDS Optex Xwave

IDS Training Guide
IDS Xwave Wireless
Introduction
IDS have innovatively introduced their Xwave wireless technology to the well-renowned
and trusted Optex Detectors.
This guide provides basic steps to configure the IDS Optex Xwave Wireless Detectors.
The guide will cover installing your detector correctly, and what situation each detector
is designed for. Although this guide does give detailed steps, an understanding and
knowledge of alarm systems and concepts should be known.

IDS Optex Xwave Specifications

General

Technology	Microwave
Microwave Frequency	10.525 GHz
Detection Angle	90°
Alarm Output	Normally closed relay
Tamper Output	Normally closed relay
Detection Range	Up to 15 meters

Summary

IDS Training Guide Introduction

IDS Wireless Transmitters

1.1. Transmitters

Details the IDS Xwave wireless transmitters and variants for indoor/outdoor use.

1.2. Transmitter Power

Explains power sources and consumption for wireless transmitters.

1.3. Supervision

Describes the supervision signal and jumper settings for transmitters.

Learning IDS Optex Wireless Detectors to X-Series Panel

2.1. X-Series Wireless Receiver

Explains the need for an X-Series Wireless Receiver to connect detectors.

2.2. Programming

Details the process of programming wireless detectors to the X-Series panel.

2.3. Supervision Settings

Explains X-Series system supervision time settings and configuration.

860-07-587 Door Contact Overview

3.1. Hardware

Identifies hardware components of the 860-07-587 door contact.

3.2. Installation

Provides installation instructions for the 860-07-587 door contact.

862-01-WNX-40 PI-T Indoor PIR Detector

4.1. Hardware

Details the hardware components of the 862-01-WNX-40PI-T detector.

4.2. Detection Area

Describes the detection range and angles of the 862-01-WNX-40PI-T PIR detector.

4.3. Installation

Provides installation instructions for the 862-01-WNX-40PI-T detector.

862-01-WFX-360-1 B PIR Detector

5.1. Hardware

Details the hardware components of the 862-01-WFX-360-1B detector.

5.2. Detection Area

Explains the detection range and angles for the 862-01-WFX-360-1B 360° PIR detector.

5.3. Installation

Provides installation instructions for the 862-01-WFX-360-1B detector.

862-01-EX-35 RC Indoor PIR Detector

6.1. Hardware

Identifies hardware components of the 862-01-EX-35RC detector.

6.2. Detection Area Modes

Describes detection modes (Wide Angle, Long Range, Pet Alley) for the 862-01-EX-35RC.

6.3. Installation

Provides installation instructions for the 862-01-EX-35RC detector.

862-01-CX-702 RSC Indoor PIR Detector

7.1. Hardware

Identifies hardware components of the 862-01-CX-702RSC detector.

7.2. Detection Area

Describes detection modes and adjustments for the 862-01-CX-702RSC.

7.3. Installation

Provides installation instructions for the 862-01-CX-702RSC detector.

VX Infinity Series Detectors

8.1. Hardware

Details the hardware components of VX Infinity detectors.

VX Infinity Series Dip Switch Functions

Explains the function of each dip switch on VX Infinity detectors.

VX Infinity Series LED Indicators

Describes the LED indicators for VX Infinity detectors.

8.2. Detection Area

Explains customizable detection area settings for VX Infinity.

8.3. Area Masking

Details how to mask specific zones in VX Infinity detectors.

8.4. Installation

Provides installation instructions for VX Infinity detectors.

9.862-01-HX-40 RAMC Outdoor Detector

9.1. Hardware

Identifies hardware components of the 9.862-01-HX-40RAMC detector.

9.862-01-HX-40 RAMC Dip Switch Functions

Explains the function of each dip switch on the 9.862-01-HX-40RAMC.

9.862-01-HX-40 RAMC LED Indicators

Describes the LED indicators for the 9.862-01-HX-40RAMC detector.

9.2. Detection Area

Explains the detection range and customisation for the HX-40Ram.

9.3. Installation

Provides installation instructions for the 9.862-01-HX-40RAMC.

HX-80 NRAM Long Range Outdoor Detector

10.1. Hardware

Identifies hardware components of the HX-80NRAM detector.

HX-80 NRAM Dip Switch Functions

Explains the function of each dip switch on the HX-80NRAM detector.

HX-80 NRAM LED Indicators

Describes the LED indicators for the HX-80NRAM detector.

10.2. Detection Area

Explains detection range and masking flaps for the HX-80NRAM.

10.3. Installation

Provides installation instructions for the HX-80NRAM detector.

FTN Series Detectors

11.1. Hardware

Identifies hardware components of FTN Series detectors.

FTN Series Dip Switch Functions

Explains the function of each dip switch on FTN Series detectors.

11.2. Detection Area

Explains the narrow detection area and rotation of FTN Series detectors.

11.3. Installation

Provides installation instructions for FTN Series detectors.

862-01-BX-80 NRC Wall-Mounted Detector

12.1. Hardware

Identifies hardware components of the 862-01-BX-80NRC detector.

862-01-BX-80 NRC Dip Switch Functions

Explains the function of each dip switch on the 862-01-BX-80NRC.

862-01-BX-80 NRC LED Indicators

Describes the LED indicators for the 862-01-BX-80NRC detector.

12.2. Detection Area

Explains detection area adjustments for the 862-01-BX-80NRC.

12.3. Installation

Provides installation instructions for the 862-01-BX-80NRC.

AX-Series Photoelectric Beams

13.1. Hardware

Identifies hardware components of the AX Series transmitter.

AX Series Transmitter Dip Switch Functions

Explains dip switch functions for the AX Series transmitter.

AX Series Receiver Hardware and Settings

Details hardware and dip switch functions for the AX Series receiver.

AX Series Beam Frequency Selection

Explains beam frequency selection to avoid crosstalk.

13.2. Aligning Beams

Guides on aligning beams for optimal detection.

Installation Recommendations

14.1. Indoor Detectors

Provides installation recommendations for indoor detectors.

14.2. Outdoor Detectors

Provides installation recommendations for outdoor detectors.