Copyright 2019 ID TECH. All rights reserved. Document Number: 80145503-001
Page 12 of 32
5.6. Agency Approvals and Compliances
6. Decommissioning SRED Devices
All PCI devices require proper decommissioning prior to device disposal in order to ensure the
protection of all sensitive financial card data. For instructions on decommissioning your device,
see Decommissioning of SRED Devices on the ID TECH Knowledge Base.
7. Base Functionality
7.1. Smart Card function
• EMV Level 1 approval.
• Reads ISO 7816 (1,2,3,4) (T=0, T=1) (Class A, B) microprocessor cards.
• Monitor Card Seated Status.
• TDES and AES Encryption.
• DUKPT key management.
7.2. Magnetic Stripe function
• Meets ISO 7811 (Supports AAMVA format and JIS II Card format).
• Support single, dual or triple tracks.
• Bi-directional reading.
• TDES or AES Encryption.
• DUKPT key management.
• PCI PTS 4.x Function Supported SRED.
7.3. Interface function
The device can communicate with the host via USB-KB or USB-HID.
EN55022/EN55024, Class- B
Cd < 100ppm
Pb,Hg,Cr6+,PBDE,PBB < 1000ppm
REACH Compliance with REACH regulation
EMV Contact L1&L2
PCI SRED 4.1 Augusta S version only
IK rating IK08
IP rating IP52