IDTECH Augusta - Default Chapter; Table of Contents; Quick Chip and M;Chipf

Copyright 2019 ID TECH. All rights reserved. Document Number: 80145503-001
Page 4 of 32
Table of Contents
1. INTRODUCTION 5
1.1. QUICK CHIP AND M/CHIP FAST SUPPORT 6
1.2. SRED SUPPORT 6
2. SOFTWARE INTEGRATION 7
3. FEATURES 8
4. APPLICABLE DOCUMENTS 9
5. SPECIFICATIONS 9
5.1. STRUCTURE 9
5.2. DURABILITY/RELIABILITY 9
5.3. ENVIRONMENTAL 10
5.4. POWER MANAGEMENT 10
5.5. PHYSICAL DIMENSIONS 11
5.6. AGENCY APPROVALS AND COMPLIANCES 12
6. DECOMMISSIONING SRED DEVICES 12
7. BASE FUNCTIONALITY 12
7.1. SMART CARD FUNCTION 12
7.2. MAGNETIC STRIPE FUNCTION 12
7.3. INTERFACE FUNCTION 12
7.4. KEY INJECTION FUNCTION 13
7.5. REMOTE KEY INJECTION FUNCTION 13
7.6. BOOTLOADER FUNCTION 13
8. USB COMMUNICATION 14
8.1. ITP PROTOCOL FORMAT 14
8.2. NGA PROTOCOL FORMAT 15
8.3. USB DESCRIPTORS 16
USB-HID 16
USB-KB 18
8.4. USB KB COMMUNICATION COMMAND AND RESPONSE FORMAT 21
Data Formats 22
MSR Modes of Operation 22
Auto Mode 22
Buffer Mode 23
9. EMV L2 DATA OUTPUT FORMATS 24
9.1. STANDARD TRANSACTION MODE 24
9.2. NO DATA ENCRYPTION KEY & NO TRANSARMOR CERTIFICATE: 24
9.3. TDES/AES MODE & DATA ENCRYPTION KEY EXIST: 24
9.4. TRANSARMOR MODE & TRANSARMOR CERTIFICATE EXISTS: 25
9.5. QUICK CHIP AND M/CHIP FAST TRANSACTION MODE 26
9.6. NO DATA ENCRYPTION KEY & NO TRANSARMOR CERTIFICATE: 27
9.7. TDES/AESMODE & DATA ENCRYPTION KEY EXIST: 27
9.8. TRANSARMORMODE &TRANSARMOR CERTIFICATE EXIST: 28
10. BASIC OPERATION 29
11. TROUBLESHOOTING 29
12. APPENDIX A: QUICK CHIP AND M/CHIP FAST SUPPORT 30
13. HOW TO ENABLE QUICK CHIP AND M/CHIP FAST MODE 30
14. FASTER EMV (QUICK CHIP) DATA 31