IDTECH SREDKey 2 - HID Mode Reset Device Command; KB Mode Reset Device Command

ID TECH SREDKey 2 Integration Manual
Page | 14
7.2.4. Reset Device (C7 80): HID Mode
The Reset Device command resets the SREDKey 2 to factory default settings. Note that this
command is irreversible and that device administrators must reconfigure the reader after sending
this command.
Command Body: C7 80
Response: C7 00 00 00
7.3. ITP Protocol Commands
7.3.1. Reset Device (53 18): KB Mode
The Reset Device command resets the SREDKey 2 to factory default settings. Use this command in
Keyboard Mode. Note that this command is irreversible and that device administrators must
reconfigure the reader after sending this command.
Command Body: 53 18
Response: 06