ID TECH SREDKey 2 Integration Manual
Page | 17
8.2. Updating SREDKey 2 Firmware
The steps below describe the process for updating SREDKey 2 firmware via the Universal SDK Demo
app.
Before you begin, contact your ID TECH representative to receive the most recent SREDKey
2 firmware. Download the ZIP file and extract it to your computer.
1. Connect the SREDKey 2 to your PC via USB cable.
2. Download and install the latest USDK Demo app
from the ID TECH Knowledge Base (if you
cannot access the link, please contact support).
3. Open the USDK Demo app from the Windows Start menu.
To Next Page
Loading...