necessary information about the required IO-Link hardware and software can be
found at www�ifm�com�
5 Installation
► Secure the unit with a suitable bracket�
Accessories → www.ifm.com.
At an ambient temperature > 65 °C the unit must be cooled or protected
against the radiated heat by means of a shielding screen�
For correct orientation observe the measuring segment diameter (1) and the
measuring distance (2)� The object to be measured should not be smaller than the
measured spot diameter:
[mm]
200100 300 400 500 600 700 800 900 1000
2000 3000 4000 5000 ∞
[mm]
1315 11 20 29 39 48 57 66 75 167 259 350 442
TW2000
(1) Measuring segment diameter
(2) Measuring distance
To Next Page
Loading...
