IFM Electronic VKV021 - Measuring range; Switching output behaviour

5
UK
5.1 Measuring range
V
eff
mm/s 0���25
I
out
mA 4���20
Response delay s 1���60
5.2 Switching output behaviour
  






1: Time delay after the switching threshold has been exceeded
2: Time delay after the switching threshold has been exceeded
3: Switch-off
4: Switching threshold
5: Delay
V
ss
= vibration velocity
t = time
Implementation of the time delays
The time delay starts when the defined switching threshold is exceeded (1) / (2)�
The time delay is cancelled when the value falls below the switching threshold
(without switch-off)� The switch-off is triggered when the switching threshold is
exceeded during a full time delay (3)�