IFM AL1340 - Modbus TCP Configuration; Integrating AL1340 into Modbus Projects

IO-Link Master with Modbus TCP Interface DataLine 4 Ports IP 65 / IP 66 / IP 67
63
>
9.3 Modbus TCP
Content
Integrate the AL1340 into the Modbus project .......................................................................................63
Set IO-Link master ..................................................................................................................................65
Set IO-Link ports .....................................................................................................................................66
Read input data of several IO-Link ports ................................................................................................67
Read input data of individual IO-Link ports ............................................................................................68
Write output data of several IO-Link ports ..............................................................................................69
Write output data of individual IO-Link ports ..........................................................................................70
Read diagnostic information and events ................................................................................................71
Read device information .........................................................................................................................72
Control IO-Link master ...........................................................................................................................72
Configure IO-Link devices ......................................................................................................................72
Modbus TCP: Programmers' notes ........................................................................................................73
34455
On the field bus side, the device can be configured with any Modbus TCP compatible projection
software.
>
9.3.1 Integrate the AL1340 into the Modbus project
34456
The AL1340 provides the functionality of a Modbus-TCP slave. The user can integrate the IO-Link
master via the profile of a generic Modbus-TCP slave to a fieldbus project.
The IO-Link master, the IO-Link Ports and the process data are configured via the Modbus register of
the AL1340.