IFM Ecomat 300 AC1421 - Page 6

6
ifm Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2 2015-11-30
Preliminary note Legal and copyright information
>
1.1 Legal and copyright information
6088
© All rights reserved by ifm electronic gmbh. No part of this manual may be reproduced and used
without the consent of ifm electronic gmbh.
All product names, pictures, companies or other brands used on our pages are the property of the respective rights owners:
• AS-i is the property of the AS-International Association, (→ www.as-interface.net)
• CAN is the property of the CiA (CAN in Automation e.V.), Germany (→ www.can-cia.org)
• CODESYS™ is the property of the 3S – Smart Software Solutions GmbH, Germany (→ www.codesys.com)
• DeviceNet™ is the property of the ODVA™ (Open DeviceNet Vendor Association), USA (→ www.odva.org)
• EtherNet/IP
®
is the property of the →ODVA™
• IO-Link
®
(→ www.io-link.com) is the property of the →PROFIBUS Nutzerorganisation e.V., Germany
• Microsoft
®
is the property of the Microsoft Corporation, USA (→ www.microsoft.com)
• PROFIBUS
®
is the property of the PROFIBUS Nutzerorganisation e.V., Germany (→ www.profibus.com)
• PROFINET
®
is the property of the →PROFIBUS Nutzerorganisation e.V., Germany
• Windows
®
is the property of the →Microsoft Corporation, USA
>
1.2 Purpose of the document
12104
This document applies to devices of the type "Smart PLC AC14 with EtherNet/IP interface" (art. no.:
AC1421/AC1422) as from firmware version 3.1.2.
These instructions describe the following topics:
 Operation and configuration of the device via the menu (GUI and web interface)
 Command channels, cyclic and acyclic data records
 Fault diagnostics and troubleshooting