IFM Ecomat 300 AC1421 - Quick Setup

46
ifm Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2 2015-11-30
Menu Quick setup
>
5.2 Quick setup
7273
The [Quick setup] menu provides fast access to the most important device functions.
Navigation path
Functions
→ Quick setup: Project AS-i networks (→ page 47)
→ Quick setup: Configure the operating mode of the AS-i masters (→ page 48)
→ Quick setup: Configure the output access (→ page 49)
→ Quick setup: Access the device via QR code (→ page 49)
→ Quick setup: configure the EtherNet/IP interface (→ page 50)
→ Quick setup: Set the configuration mode (→ page 51)
→ Quick setup: Set the configuration interface (→ page 52)
→ Quick setup: Address the AS-i slaves connected to AS-i master 1 (→ page 54)
→ Quick setup: Address the AS-i slaves connected to AS-i master 2 (→ page 55)