8
ifm Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2 2015-11-30
Preliminary note Overview: User documentation for AC14
>
1.4 Overview: User documentation for AC14
6998
ifm electronic provides the following user documentation for the models of the device class "Smart
PLC AC14":
Technical data of AC142n as a table
Notes on mounting and electrical installation of AC142n
Setup, description of the operating and display elements, maintenance information, scale
drawing
Notes on operation of AC142n via GUI and web interface
Description of the cyclic and acyclic data records, fieldbus parameters and command interface
Fault description
Notes on configuration of a AC142n system in CODESYS
Notes on programming of the PLC of AC142n
Description of the device-specific CODESYS function libraries
Legend:
*... The operating instructions are supplied with the device.
All documents can be downloaded from ifm's website.
→ www.ifm.com > Select country > [Data sheet search] > (Article no.) > [Operating
instructions]
>
1.5 Getting started
6922
Mounting instructions and notes on the electrical installation of the device can be found in the supplied
operating instructions. If you misplace your instructions, you can download them from the ifm website:
→ www.ifm.com > Select country > [Data sheet search] > (Article no.) > [Operating instructions]
Familiarise yourself with the graphical user interface (→ Operation (→ page 19))!
The menu functions of the graphical user interface are described in the chapter → Menu (→ page 44).
For information regarding the setup of the device following installation and electrical connection please
refer to chapter → Setup (→ page 110).
For information about the programming of the device-internal PLC with CODESYS, please refer to the
programming manual:
→ www.ifm.com > Select country > [Data sheet search] > (Article no.) > [Operating instructions]
To Next Page
Loading...
