Need help?Do you have a question about the IFM LMT100 and is the answer not in the manual?
General| Product category | Accessories |
|---|---|
| Product Type | LMT100 |
| Protection Class | IP67 |
| Connection | M12 connector |
| Output | Analog |
| Material | Stainless steel |
Read document, suitable use, intended purpose, permissible media, and qualified personnel for installation/operation.
Ensure no pressure, no medium, note temperature dangers, use ifm adapters for ingress resistance.
Steps for installing with O-ring seal, greasing thread, tightening torque, and checking for ingress resistance.
Details installation with metal sealing cone (green seal) and optional PEEK sealing ring (beige).
Instructions for installing with O-ring and spacing ring in tuning fork adapters, including tightening torques.
Shows normal and teach operation wiring, pin assignments, and core colours for ifm sockets.
Explains parameter adaptation for sensitivity and functions; warns about plant function changes.
Details setting parameters via PC/IO-Link and using a memory plug for saving/transferring settings.
Describes parameter setting during operation, requiring an IO-Link capable master.
Explains SP/rP set points, hysteresis, window functions, and output polarity (PnP/nPn).
To Next Page
