IFM LMT100 - 4�2 Other Features of the Unit; 4�3 Application Examples; 4�3�1 Application Examples for Unit Types with Short Probe

8
4.2 Other features of the unit
• Defined position of the cable entry for angled sockets for use of ifm welding
adapters
• Streamlined sensor geometry, no blockage of the pipe when unit types with
short probe are used, no pressure loss
• Orientation-independent installation possible
4.3 Application examples
4.3.1 Application examples for unit types with short probe
1
1
1
1: Installation position only suited to some extent
• Fig� 5-2: Possible installation positions in a tank
(e�g� for point level detection or as run-dry protection)�
• Fig� 5-3: Fill level monitoring in pipes
In case of strongly adhering and viscous media the installation positions
(1) are only suited to some extent� Residues might be detected as level�