iHome IP39 - iP39 Quick Start Guide; Connect AC Power; Access and Dock iPhone;iPod; Set iP39 Clock Time

1
1
iP39 Quick start
Attach AC adaptor cable to the DC
jack on back of the iP39 and plug the
other end into a working wall socket
to play and charge iPhone/iPod and
to provide power to the USB port.
1: Connect to AC power
For this iPhone/iPod
Use this insert
NOTE: If you do not have an insert for your iPhone/iPod, please visit www.ihomeaudio.com or call iHome toll free
at 800-288-2792 to purchase one.
RESET
RESET
TEST
TEST
Select the proper insert for your
iPhone or iPod from the table below
and place in dock. Gently place
iPhone/iPod into dock (iPhone/iPod
must not be in a “skin” or case).
iPhone/iPod will charge while
docked. Press the Play Button on
the iP39 to play your iPhone/iPod.
3: Dock iPhone/iPod
aux. in
time
sync
time
set
dst
-1
+1
iPod nano 5G
insert 18
iPod nano 5G
iPod Touch 2G
iPod touch 2G
insert 16
iPhone 3G
Insert 15
iPhone 3G/3GS
2: Access slide-out dock
Press on the dock door on the front
of the unit to release the universal
dock. Push dock back into unit when
not in use.
4: Time
• To use time sync, dock your iPhone/iPod and press the Time
Sync/Time Set Button. The unit will sync to the time on your iPhone/iPod.
• To set time manually, move the DST switch on rear of unit to +1 or -1
(adds or subtracts an hour for daylight saving time or standard time).
• Press & hold the Time Sync/ Time Set button on the back of unit until
the time display flashes. Press the / buttons to set the current time.
• Press the Time Sync/ Time Set button. The year display flashes.
Press the / buttons to set the current year.
• Press the Time Sync/ Time Set button. The date flashes.
Press the / buttons to set the current date and day.
• Press the Time Sync/ Time Set button to confirm settings.