EasyManua.ls Logo

iHome IP42 - Quick Start Guide; Power Setup; Time Synchronization Process

iHome IP42
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Attach AC adaptor cable to
DC jack on back of the iP42 and
plug the other end into a
working outlet.
1
Select the dock insert for your iPhone
or iPod
®
model from the table below
and place insert in dock.
NOTE: If you do not have an
insert for your iPhone/iPod,
please visit
www.ihomeaudio.com or call
iHome toll free at
800-288-2792 to purchase one.
2: inserts
4: iPhone/
iPod
Gently dock an iPhone or iPod into
the dock with proper insert
(iPhone/iPod must not be in a skin
or case). The iPhone/iPod will
charge while docked. Press the
Button to play your iPhone/iPod.
Dock your iPhone
Press the Time set/sync button
on back of the unit.
“SYNC OK” will flash on the
display, indicating sync attempt
Day and date will appear and you
will hear a beep when sync is
complete.
If sync fails, attempt again or set
time manually (see page 3).
3: time sync
Press the Radio button to select
FM radio mode.
Turn the Set Wheel to select a
station.
See page 4 for programming
presets.
5: radio
Use this insert
For this iPhone / iPod
iPhone 3G
insert 15
iPhone 3G/3GS
iPod touch 2G
insert 16
iPod touch 2G
nano 5G
insert 18
nano 5G
iP42 Quick start
RESET
RESET
TEST
TEST
1: power

Related product manuals