EasyManua.ls Logo

iHome IP98 - Quick Start Guide

iHome IP98
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
quick start
Attach AC adaptor cable to
DC jack on back of the iP98
and plug the other end into a
wall socket.
Snap AM antenna into provided
stand, then plug antenna cable
into socket on back of iP98.
Move antenna 12” away.
• Move the DST switch on back
of unit to +1 or -1 (adds or
subtracts an hour)
• Press & hold the Time Zone
button on back until the
display flashes
Turn the Set Wheel to select
your time zone
• Press the Time Zone
button again.
1
4: time zone
5: iPhone/
iPod
Insert an iPhone or iPod into the
dock with proper insert
(iPhone/iPod must not be in a
skin or case). The iPhone/iPod
will charge while docked.
Press the
Button on the iP98
to play your iPhone/iPod.
Press the Radio button and
press again to select AM/FM
band. Turn the Set Wheel to
tune in a station. See page 4 for
programming presets.
NOTE: If you do not have an insert for
your iPhone/iPod, please visit
www.ihomeaudio.com or call iHome toll
free at 877-446-6301 to purchase one.
Use this insert
For this iPhone / iPod
iPhone 3G
insert 15
iPhone 3G
iPod touch 2G
insert 16
iPod touch 2G
nano 4G
insert 17
nano 4G
2: antenna
1: power
Select the dock insert for your
iPhone or iPod® model from the
table below and place insert in
dock. Never dock an iPhone/
iPod without an insert in place.
3: inserts
6: radio

Related product manuals