11
Plugging in for Naked broadband
1. Take the grey-tipped phone cable and plug it into the grey DSL port on the back of your modem.
2. Plug the other end of the cable directly into the phone socket on the wall. Do not use the line filter.
3. Plug the black power supply cable into the modem’s Power port and an available power outlet. Turn the
modem on using the Power button.
4. You can connect WiFi enabled computers, tablets or smartphones to your modem’s WiFi network using the
details on the Default Wireless Settings card found in the box.
5. Alternatively, use the yellow-tipped Ethernet cable to connect a computer’s Ethernet port to any of the
yellow LAN ports.
6. Let your modem rest for 10-15 minutes. It should retrieve your settings and get online automatically. Try
viewing a website – if it works, you can skip to page 16.
If you were unable to view a website, don’t panic. Just follow the steps on page 8.
To Next Page
Loading...
