Need help?Do you have a question about the iiNet Budii Lite and is the answer not in the manual?
General| Type | ADSL2+/VDSL2 Modem Router |
|---|---|
| Frequency Bands | 2.4GHz |
| Maximum Wireless Speed | 300 Mbps |
| Wireless Standard | 802.11b/g/n |
| Security | WEP, WPA, WPA2 |
| Ports | 1 x USB 2.0 port |
Lights up for ADSL broadband or NBN/fibre internet connection status.
Lights up when Wi-Fi networks are ready for devices to connect.
Four Gigabit Ethernet ports for connecting computers and other devices.
Ports for connecting to ADSL or NBN/Fibre internet services.
Ports for USB storage/modems, and connecting a home telephone line.
Buttons for controlling power, Wi-Fi, and WPS setup.
Steps to access the modem settings via web browser using IP address and password.
Takes you to the Wizard page for initial setup.
For all Wi-Fi configuration options.
For all Netphone (VoIP) advanced configuration options.
Advanced configuration options including password and remote management.
Indicates if Budii Lite® has an established ADSL 'sync' or physical connection and its type.
Restart your modem to resolve issues. This will not wipe any settings from Budii Lite®.
Configure primary/secondary SSIDs, channel, and mode for your wireless network.
Select security type (WEP, WPA/WPA2-PSK, WPA/WPA2-802.1x) and configure pre-shared key.
Steps to turn off the wireless function via the navigation bar and save settings.
Wi-Fi Protected Access – Pre-Shared Key. More secure and user-friendly.
Configure pre-shared key type (passphrase or hex) and pre-shared key.
Steps to enable WDS function and add wireless access points via AP MAC Address Table.
Grant or prevent wireless access using MAC addresses for individual computers.
Allow specific computers or block specific computers from the network.
Enable filtering, select mode (allow/block), and enter MAC addresses.
Interface for setting up WPS, supporting 2.4G and 11ac wireless.
Connect devices using the Push Button Configuration (PBC) method.
Connect devices using their Personal Identification Number (PIN).
Steps to connect via WPS using the Push Button Configuration method.
Steps to connect via WPS using the Personal Identification Number (PIN) method.
Details sections on General Settings, Advanced Call Features, and Voice Codec Configuration.
Forwards VoIP calls to another number: unconditionally, on busy, or on no answer.
Interface to set up Budii Lite's FTP server for accessing files on a USB hard drive.
Steps to plug in USB drive, configure port, enable FTP server, and set port number.
Steps to create an FTP user: username, password, access level, volume, and path.
Steps to enable file server, change settings like server name, description, and group name.
Steps to add a user, enter share folder name, select access mode, and set password.
Section to change Budii Lite's password and enable remote management.
Enable remote management, select access port, and specify allowed computers.
Interface to enter and confirm a new login password for Budii Lite®.
Steps to change DNS addresses by setting 'Let my ISP manage...' to No and entering addresses.
Block computers from the Internet at specific times you list.
Set up rules to block access to websites by URL or keywords.
Choose the ADSL standard for your Internet connection.
Choose ADSL mode or 'Automatic'; warning about potential instability.
Configure WAN source, ADSL username, password, and protocol.
Steps to correctly set up port forwarding using an application example.
Steps to upgrade Budii Lite's firmware: download, select, and upgrade.
Steps to reset Budii Lite® using the physical Reset button on its rear panel.
Lists devices connected to the network and allows IP address management.
Tool to test network connection by pinging an IP address or domain name.
To Next Page
