42
REMOTE MANAGEMENT SETTINGS
Port
Incoming requests to access Budii Lite’s admin site will only be permitted through the port you specify.
The default port is 2420.
Selected computers
By default, enabling remote management lets you access Budii Lite’s settings from any computer on the Internet.
However, you might want to restrict access and only permit remote management from specific computers.
Budii Lite
®
lets you specify up to three. If you fill out this section, only computers with IP addresses matching your
selections will be permitted to log in to the modem.
IP Address
Once you’ve enabled Remote Management, you’ll be able to access Budii Lite’s admin pages by entering your
unique IP address, along with the port you specify, into a browser. Your current unique IP address is shown on the
setup page in the modem web interface.
To access Budii Lite
®
remotely, you’d type in a URL using your unique IP address followed by “:2420”. For example:
http://123.123.123.123:2420
To Next Page
Loading...
