iiNet Budii Lite - Restore to Factory Settings; Factory Reset Warning; Factory Reset Methods; Resetting via Physical Button

67
Restore Budii Lite
®
to factory settings
Restoring Budii Lite
®
to factory settings will clear all your settings, so if you do this you’ll need to go through the
setup process again. There are two ways to reset Budii Lite
®
to factory settings:
× By pressing and holding the Reset button on Budii Lite’s rear panel.
× Through the Handy Tools section of Budii Lite’s web interface.
To reset Budii Lite
®
to factory settings using the Reset button:
× Make sure Budii Lite
®
is powered on.
× Using a pen or paperclip, gently press and hold the Reset button on Budii Lite’s rear panel for
12 seconds.
Budii Lite
®
will power off and restart. Once it powers up again, all settings are lost and returned to factory
defaults. To reset Budii Lite
®
to factory settings, do the following:
× At C2 - Restore Budii Lite
®
to factory settings, click Continue.
× Click Apply.