18
Configuring wireless protocol and channel options
Budii Lite
®
supports the 802.11ac, 802.11n, 802.11g, 802.11b wireless protocols. It also lets you:
× Choose which of these protocols devices can use to connect to your network
× Change the wireless channel that traffic will travel on in your home network
× Change the bandwidth of your wireless network.
To configure wireless protocol and channel options
1. From the navigation bar on the left, click A. Set up my wireless or E. Set up my AC wireless depending on
the wireless network you’re using.
2. Under Wireless Network, at the Channel dropdown, pick a channel for the secondary network, or leave
the dropdown on Auto and Budii Lite
®
will choose a channel for you.
3. At Mode, select a Wireless Protocol. By default, Budii Lite will try to support as many modes as possible.
4. At Bandwidth, if you selected 802.11n or 802.11n + 802.11g + 802.11b at Mode, you can change the
Bandwidth of your wireless network.
5. Click Save Settings
To Next Page
Loading...
