iiNet Budii Lite - Adding MAC Addresses to Filter Table; Setting Up the MAC Address Filter

22
To add MAC addresses to the table:
1. At the Wireless DHCP client list dropdown, find the computer you’re interested in.
2. At the ‘Copy to’ dropdown, choose a number that corresponds to an empty row in the My Computers table.
3. Click the Copy button. The computer’s MAC address is pasted into the table.
4. Repeat these steps for other computers you want to filter, making sure you choose a new table row
each time.
To set up the MAC address filter:
1. Click C. Set up MAC address filter.
2. Click Toggle MAC address filtering, setting it to On.
3. Select whether the MAC address filter should allow or not allow computers to access your wireless
network.
4. Enter the MAC addresses of the computers to be filtered by doing one of the following:
- Follow the procedure above to add MAC addresses to the table.
- Type the MAC addresses into the empty rows in the My Computers table.
5. Click Save settings.