iiNet Budii Lite - Connecting Wireless Computer via WPS; Connecting via PBC; Connecting via PIN

24
To connect a wireless computer using PBC:
1. Click D. Set up WPS.
2. Scroll to the Connect via Push Button Configuration section.
3. Push the WPS button on your wireless computer.
4. Within 60 seconds, click Connect.
5. If your device didn’t connect, press Refresh and try again.
To connect a wireless computer using a PIN:
1. Click D. Set up WPS.
2. At Connect via a Personal Identification Number, enter your wireless computer’s PIN.
3. Within 60 seconds, click Connect.
4. If your device didn’t connect, press Refresh and try again.