13
Plugging in for NBN or Fibre
1. Take the red-tipped Ethernet cable and plug it into the red WAN port on the back of your modem.
2. Plug the other end of the cable directly into the active UNI-D port on your NBN Connection Box or fibre
unit. This is typically UNI-D1. If this doesn’t work and you don’t know which one to use, please contact us
using the details on the back cover of this guide.
3. Plug the black power supply cable into the modem’s Power port and an available power outlet. Turn the
modem on using the Power button.
4. You can connect WiFi enabled computers, tablets or smartphones to your modem’s WiFi network using the
details on the Default Wireless Settings card found in the box.
5. Alternatively, use the yellow-tipped Ethernet cable to connect a computer’s Ethernet port to any of the
yellow LAN ports.
6. Let your modem rest for 5-10 minutes. It should retrieve your settings and get online automatically. Try
viewing a website – if it works, you can skip to page 16.
If you were unable to view a website, simply follow the steps on the next page.
To Next Page
Loading...
