2 - Getting started
23
StealthPedal
™
CS
2.12 Playing StealthPedal For The First Time With AmpliTube
Now that you have completed installing and connecting StealthPedal, and
all required software is installed, let’s play! Plug in StealthPedal, go to your
applications (or programs) menu and launch “AmpliTube”.
Open AmpliTube Audio MIDI setup window (figure 2.9) and select
StealthPedal as your audio interface, and you’ll be ready to go.
figure 2.9
If you want to control AmpliTube parameter with StealthPedal controls,
select the StealthPedal device on the top right corner of the AmpliTube
interface and click the ON button right close to it (figure 2.10).
For additional information on how to setup AmpliTube check the AmpliTube
User Manual.
The AmpliTube default audio settings are optimized for low latency and
good performance. The default audio settings for the StealthPedal audio
interface are:
• Windows: 144 samples buffer-size, 48 kHz sampling rate.
• Mac: 128 samples buffers-size, 48 kHz sampling rate.
On most computers, these settings will deliver the optimal compromise
between low latency and great reliability. However, if you would like to
figure 2.10
To Next Page
Loading...
Need help?
General
