IKEA DISKAD - Page 18

building up in the appliance and stop the appliance door bursting open.
1. Press ⁠.
a. The programme is saved and the appliance switches off.
2. Press to resume the programme.
Terminate programme
To end a programme early or to switch from a programme that has already started, you will need to cancel it first.
1. Open the appliance door.
2. Press for approx. 3 seconds
3. Close the appliance door.
a. The programme is canceled and ends after approx. 1 minute.
Switching off appliance
1. Please note the information on “Safe use” → Page 12.
2. Press .
Tip: If you press during the wash cycle, the programme currently running will be interrupted. When you switch the appliance back on, the programme continues automatically
⁠Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance
BASIC
SETTING
DISPLAY
TEXT
SELECTION DESCRIPTION
Water
hardness
H:04 H:00 – H:07
Set the water softening system to your water hardness. → “Setting water softening system”,
Page 29
Level H:00 switches the water softening system off.
Rinse aid
dispensing
r:05 r:00 – r:06
Set the amount of rinse aid to be dispensed.
→ “Setting the amount of rinse aid”, Page 32
Switch the rinse aid system off with level r:00.
Sensor setting SE:00
SE:00 –
SE:02
Set the water sensor for identifying soiling. → “Sensors”, Page 14
Extra Dry d:00 d:00 – d:01
The temperature is increased during the final rinse, which improves the drying result. This
may increase the run time slightly.
Note: Not suitable for delicate items of tableware. Switch Extra Dry on “d:01” or off “d:00”.