IKEA PROFFSIG User Manual

48
FAULT CAUSE TROUBLESHOOTING
Cutlery is not dry. Cutlery not arranged
properly in the cutlery
basket or cutlery
drawer.
1. Arrange the cutlery properly.
→"Arrange tableware",
Page34
2. Arrange cutlery individually
where possible.
3. Avoid points of contact.
Appliance interior still
wet after wash cycle.
Not a fault. The con-
densation drying prin-
ciple causes water
droplets in the tub –
they are indeed desir-
able here. The mois-
ture in the air con-
denses on the inside
walls, runs off and is
pumped out.
No action required.
Remnants of food on
tableware.
Tableware was placed
too close together.
1. Arrange tableware with suffi-
cient space in between.
The spray jets must reach
the surfaces of the table-
ware.
2. Avoid points of contact.
Basket is overfilled. 1. Arrange tableware with suffi-
cient space in between.
The spray jets must reach
the surfaces of the table-
ware.
2. Avoid points of contact.
Spray arm rotation is
blocked.
● Arrange tableware so that it
does not obstruct spray arm
rotation.
Spray arm nozzles are
blocked.
● Clean the Spray arms
→Page42.
Filters are soiled. ● Clean the filters.
→"Cleaning filters", Page41
Filters are inserted in-
correctly and/or not
engaged.
1. Insert the filters properly.
→"Filter system", Page41
2. Engage the filters.
Washing programme
selected too weak.
● Select a more intensive
washing programme.

IKEA PROFFSIG Specifications

General

Brand	IKEA
Model	PROFFSIG
Category	Dishwasher
Language	English