What to do if my IKEA Oven display shows ---°C?
If your IKEA oven display shows '---°C', it means you're trying to set the microwave function with the door open or with the microwave function set at 0 Watt. Close the door if it's open, return to the off position, and reset the microwave function.
What to do if the display shows an error code on my IKEA Oven?
If your IKEA oven displays an error code not listed, it indicates an electrical fault. First, deactivate the oven using the house fuse or safety switch in the fuse box, then reactivate it. If the error code reappears, contact an Authorised Service Centre.
What to do if the IKEA SMAKSAK display shows ---°C?
If your IKEA oven display shows '---°C', it means you're trying to set the microwave function while the door is open, or the microwave function is set with 0 Watt. Close the door, return to the off position, and reset the microwave function.
How to fix IKEA Oven lamp that does not operate?
If the lamp in your IKEA oven isn't working, the lamp is likely defective and needs to be replaced.
What to do if the water comes out of the cavity embossment in my IKEA Oven?
If water comes out of the cavity embossment in your IKEA oven, it means there's too much water. Deactivate the oven, ensure it's cold, and wipe away the excess water with a cloth or sponge. Then, add the correct amount of water to the cavity embossment, following the specific procedure.
What to do if my IKEA Oven display shows an error code that is not in the manual?
If your IKEA oven's display shows an error code not listed in the manual, it indicates an electrical fault. First, deactivate the oven using the house fuse or safety switch in the fuse box, then reactivate it. If the error code reappears, contact an Authorised Service Centre.
What to do if my IKEA SMAKSAK display shows F102?
If your IKEA Oven display shows 'F102', it means the door was not fully closed or the door lock is defective. First, fully close the door. If the error persists, deactivate the oven using the house fuse or safety switch in the fuse box, then reactivate it. If 'F102' reappears, contact an Authorised Service Centre.
What to do if my IKEA SMAKSAK Oven does not heat up?
If your IKEA oven isn't heating up, there could be several reasons: * The oven might be deactivated, so activate it. * The clock might not be set, so set the clock. * The settings might be incorrect, so ensure they are correct. * The door might not be fully closed, so close it completely. * A fuse might be blown, so check the fuse. If it continues to blow, contact a qualified electrician.
What to do if my IKEA SMAKSAK Oven display shows "F102"?
If your IKEA Oven displays "F102", it means the door may not be fully closed or the door lock is defective. Ensure the door is completely closed. If the error persists, try deactivating the oven using the house fuse or safety switch in the fuse box, then reactivate it. If "F102" reappears, contact an Authorised Service Centre.
Why my IKEA SMAKSAK does not heat up?
Your IKEA oven might not be heating up because it is deactivated, so activate the oven. Also, check if the clock is not set and set it. Ensure that the necessary settings are correct. It is also possible that the automatic switch-off is activated. Another potential cause is that the fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Finally, the Child Lock may be on.
General| Type | Built-in oven |
|---|---|
| Color | Stainless steel |
| Energy class | A |
| Width | 59.5 cm |
| Height | 59.5 cm |
| Oven type | Electric |
| Volume | 72 liters |
| Functions | Convection, grill |
To Next Page
