Ilife A20 - Water Tank Operation

For more details, please visit www.iliferobot.com16
English
Product Operation
Water tank operation
The water tank with a mopping cloth is installed into the device. Please kindly
add water to the water tank before mopping. It is recommended to vacuum
the floor before mopping. Fordailymaintenance,pleasecheckoutthetips
onthecorrespondingchapterinthismanual.
Note:
1. Please do not use water tank components on the carpet .
2. Please pay attention during the mopping mode, timely add water or
clean the mopping pad. The water tank needs to be removed when
adding water.
3. Be sure to remove the water tank components when charging.
Remove the water tank
components
Slide back to remove the
water tank components.
1
Add water
Open the water injection cap and
fill it with water. Tightly close the
cap once finish water injecting.
2