Note:
If the solutions above don't resolve the issue, please try the following:
1. First, press and hold the AUTO button for 5 seconds to turn off
the robot , then press and hold the AUTO button for 3 seconds to
turn on the robot.
2. If restarting the robot still does not solve the problem, please send
the machine to the after-sales center for repair.
Troubleshooting
Error codes
The robot will remind you by flashing a red light and sounding prompt when
it malfunctions.
NO. Voice content Trouble cause What to do
02
The ground sensor
is blocked.
The robot gets stuck,
please move the robot.
The ground sensor
is faulty.
The robot cleans
small areas for a
long time.
Check the
ground sensor.
Move the robot.
01
English
For more details, please visit www.iliferobot.com 25
To Next Page
Loading...
