Maintenance
When the battery is in the depth of discharge state or not in use for a long
time, its capacity will be reduced. In this case, we suggest you to activate
it again. Charge the robot on the charging dock for 3mins, and repeat
3 times, then fully charge the robot for 5-6hours.
The robot uses long cyclic life batteries. There is no need to replace it
frequently. Please contact our support team if necessary.
Periodically wipe the sensor with a
dry cloth to keep it clean.
Clean the charging pins on the robot and the charging dock regularly with
dry cloth.
English
For more details, please visit www.iliferobot.com24
To Next Page
Loading...
