Product Operation
Water tank operation
The product is equipped with water tank components, and if there is a
demand for the mop, it is recommended to clean the area with the
dustbin first. Then change the dustbin to the water tank components to
carry out the mop work.
0
• lf during the mopping process the robot is stopped to either add water or
clean the mop, the robot will reset and plan a new pathway from where it
is started, either add water or clean the mop. In order to achieve a
better cleaning, it is recommended for single room use.
Be sure to remove the water tank components when charging.
For more details information, please visit: www.ilifecare.in
To Next Page
Loading...
