Side Brush and Suction lnlet Cleaning
• Please clean the side brush and suction inlet when they are dirty and replace
them if needed.
Dustbin and Filter Cleaning
• Please clean the dustbin and fitter after each use of the robot as instructed below.
*Reminder:
A.
Remove the dustbin and check if there is any debris in the suction inlet, and
then clean it.
B.
A primary fitter is replaceable and should be washed with water after having
been in use for about 15-30 days, after which it should be dried in a cool and
well-ventilatedplace and not to be squ eezed.
C.
High Effective Filter can not be cleaned with water.
To
prolong the life of the fitter it can be cleaned by shaking the fitter.
• Please turn off the robot and unplug the charging dock when
cleaning the robot and its accessories.
For more details information, please visit: www.ilifecare.in
To Next Page
Loading...
