Image Access widetek 44 User Manual

/ /
Manual Page 31
Description of Scan Mode, continued
Continuous
(Half automatic
mode)
The scan sequence starts directly when the application sends the start
command.
Scanning stops automatically when the length defined with the slider
Paper length (see Picture 11
) is reached or when an interrupt
command is send.
Press the Scan button of the scanner keyboard to in
terrupt the scan
sequence.
When the scan sequence is interrupted, the document’s position can be
modified.
The Start button moves the document in forward in scan direction.
The Send button moves the document reverse to the scan direction.
The Scan button starts the scan sequence again for the next document
part.
The scan sequence stops automatically when
the scanner sensors
recognize the document end.
C.1.1.5 Document Output
Eject:
Transports the document out of the scanner after terminating the scan
sequence.
Rewind:
Returns the document to the front side after scanning.
Hold:
Holds the document after terminating the scan sequence at the output
side of the transport path.
C.1.1.6 Transport Speed
Normal
The transport speed depends on the selected resolution. Valid is: The
higher the resolution, the slower the transport sped.
Slow
Reduces the transport speed to a half of the normal speed. This mode
is recommended for delicate or antique documents.

Image Access widetek 44 Specifications

General

Brand	Image Access
Model	widetek 44
Category	Scanner
Language	English