Image Access widetek 44 - Page 34

Perform Setup
34
The "White Balance" screen is displayed.
Calibrate:
Start white balance
Delete White
Balance Data:
Delete existing white balance data
The white balance is used to ensure the quality of the scan results. The
white balance will be carried out using a test target. The test targets are
marked as follows:
 WT36C-Z-01-A for WideTEK® 36
 WT48-WA-01-A for WideTEK® 44
 WT48-WA-01-A for WideTEK® 48.