IME-DC iDia - Interpreting Control Solution Results

29
CONTROL SOLUTION
Aer 7 seconds, the measurement reading will be shown together
with the date, time, measurement unit and bottle symbol (
48
and
49
).
The measurement reading should fall within the appropriate target
range (see test strip container label).
The test result lies outside the control range
If an error message is displayed during measurement, or if the
measured value is outside the target range (as shown on the test
strip container), repeat the measurement. If an error message ap-
pears again or if the measurement is again outside the target range,
please contact IME-DC customer service.
Service hotline: +49 9281 | 85 01 6-0
48 49