These cutting recommendations refer to 100 mm. diameter solid bars and a standard saw of our
product range. For 2-speed machines we suggest the motor speed to use; when it’s into a bracket ( ) it is
recommended to use a machine with ESC, which grants a continuous blade speed variation.
If the size of the material decreases, the indicated figures can be increased, considering also the
machine model and its performance and/or some accessories, for example the ESC (Electronic Speed
Control):
If the material size increases, it is necessary to decrease the indicated values, considering also the
machine model and its performance and/or some accessories, such as the ESC (Electronic Speed Control):
Using manually a saw often means a significant variation of the cutting times, because of the inconsistent
down-feed speed.
To Next Page
