1
We recommend to read carefully the information here included in order to install, use and maintain correctly
and safely this machine.
Please refer always to this instruction manual in case of assistance service need and keep it carefully for all
the machine life. The reference numbers in Italy are +39 035 4387918 and +39 035 4397828.
A consequence of the continuous improvement of the product is that some images/descriptions here included
could not correspond to the improved features of the machines.
Your kind collaboration would help us in intevening asap.
In the enclosed Compliance Declaration you will find the Safety and Reference Norms applied during the
planning and construction of this machine.
The choice and the use of the parts have been made by considering the conditions of use and the long
machine life.
The identification plate, with the serial number, is fixed on the front right angle of the base or on a side of
control box.
1.1 - ATTACHED DOCUMENT FOR E.M.C. ( INDUSTRIAL ENVIRONMENT)
The user is responsible for installation and use of this machine in compliancewith the
manifacturer's instructions shown in this manual. This plant meets the protection requirements in
accordance with the Directives 2006/42/EEC and 2004/108/EEC,
as for electromagnetic compatibility (EMC).
In particular, it follow the technical instructions of the Rules EN55011,EN50082-2 and it has been
realized for industrial and not for household use.
In the event that should be electromagnetic interferences the user is responsible for solving the
problem together with the technical assistance of the manifacturer.
Before installing the machine the user must take into account possible electromagnetic problems
of the working area. In particular, we suggest installing the plant away from:
-signalling, control and telephone cables; -radiotelevision transmitters and receivers;
-computers or controlling and measuring instrument; -safety and protection devices.
The electric supply cable must be kept as short as possible, well right and without wires.
The covers, the door and the frame must be suitably closed when the plant is operating.
Under no circumstances the plant must be modified except for adjusting and changing established
by the manifacturer.
Follow the maintenance schedule.
To Next Page
Loading...
