IMO Precision Controls K7 Series User Manual

Appendix 2 Flag List
App2-
３
(Continued)
Relay Function Description
F0140 to F014F FALS No.
The error code generated by FALS instruction is stored to this
flag.
F0150 to F015F PUT/GET error flag When a common RAM access error of special modules has
occurred an output module, the corresponding bit to the slot
turns on.
F0160 to F017F Unused
F180 to F19F Current value of high speed
counter
Stores the current value of high speed counter
(F18 : lower word, F19 : upper word)
F200 to F49F Unused
F0500 to F050F Maximum scan time Stores the maximum scan time.
F0510 to F051F Minimum scan time Stores the minimum scan time.
F0520 to F052F Present scan time Stores the present scan time.
F0530 to F053F Clock data
(year/month)
Clock data
(year/month)
F0540 to F054F Clock data
(day/hour)
Clock data
(day/hour)
F0550 to F055F Clock data
(minute/second)
Clock data
(minute/second)
F0560 to F056F Clock data
(day of the week)
Clock data
(day of the week)
F0570 to F058F Unused
F0590 to F059F Storing error step Stores the error step of the program.
F0600 to F060F Storing FMM step
If a FMM related error has occurred, its occurrence information
is stored.
F0610 to F063F Unused

IMO Precision Controls K7 Series Specifications

General

Brand	IMO Precision Controls
Model	K7 Series
Category	Controller
Language	English