IMO Precision Controls K7 Series - Page 4

5.10 Battery
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
5–42
Chapter 6. Input and Output Modules
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
6-1~6-10
6.1 Input and Output Specifications
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
6-1
6.2
Digital Input Specifications
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
6–2
6.2.1 Base Unit
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
6-2
6.2.2 Extended Module
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
6-6
6.3
Digital output Specifications
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
6–7
6.3.1 Base unit
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
6-7
6.3.2 Extended Module
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
6-10
Chapter 7. Usage of Various Functions
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7-1~7-60
7.1 Built-in function
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7–1
7.1.1 High-speed counter function
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7-1
7.1.2 Pulse Output Function
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7-9
7.1.3 Pulse Catch function
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7-17
7.1.4 Input Filter function
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7-19
7.1.5 PID Control function
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7-21
7.1.6 External Interrupt function
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7-40
7.2
Special Module
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7–42
7.2.1 A/D
ᇾ
D/A Combination
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7–50
7.2. 2 Analogue Timer
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
7–58
Chapter 8. Communication Function
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-1~8-115
8.1 Direct Protocol Communication
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8–1
8.1.1 Introduction
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-1
8.1.2 System Configuration method
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-2
8.1.3 Frame Structure
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-5
8.1.4 List of Commands
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-8
8.1.5 Data Type
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-9
8.1.6 Execution of Commands
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-10
8.1.7 1:1 Built-in Communication between GM7’ s
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-30
8.1.8 Error Codes
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-48
8.2
User Defined Protocol Communication
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8–50
8.2.1 Introduction
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-50
8.2.2 Parameter Setting
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-51
8.2.3 Function Block
ᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼᅼ
8-58