IMO ACF5 - Introduction

ACF5 0601.01 GB
www.imo.se
2
Indentification of safety instructions
Non complience of safety instruc-
tions identied by the following
symbol could aect safety for
persons
Safety instructions where
electrical safety is invol-
ved are identied by:
Safety instructions which shall be considered
for reasons of safe operation of the pump
or pump unit and/or protection of the
pump or pump unit itself are marked
by the sign:
cm
;
Introduction
A screw pump from IMO is a quality product that is designed for a long problem free operation in tough environ-
ments. As all other mechanical products they do however requires a certain grade of maintenance and service in
order to guarantee a faultless and economic favourable operation.
A recommendation is to go through the pump each 5 year in order to replace wear details such as ball bearings,
the mechanical seal and certain gaskets and o-rings. A relatively small review of a screw pump from IMO means
that the pump in most of the cases will be in a condition “as new” and therefore give the operator another long and
problem free operation.