IN-COMMAND JRVCS2 - Set Passcode Timer; Change Passcode; Clear Passcode

JRVCS2
17
3. Confi rm new passcode.
• Set Passcode Timer
Press the “Set Timer” button to select the idle time to
activate the passcode protection.
Press the “Clear Passcode” button to clear the passcode.
This will restart the APP, take the user to the End-User License
Agreement, and have the user setup a new passcode.
1. Press the “Change Passcode” button to change to a new
passcode.
2. Enter the new passcode.
• Change Passcode • Clear Passcode