JRVCS2
8
• SAFETY LOCKOUT
iN-Command is equipped with a Safety Lockout feature to
ensure certain system functions are unavailable during transit.
When the Brake Signal on the tow vehicle is activated, the
iN-Command will lock down all motorized functions.
The Display Commander and mobile devices will also display
“Travel Lock On” in red letters and the affected buttons will
cease to activate.
The lights, water pump, water heater, generator, and tanks
sensors will continue to function.
To turn the Travel Lock off, the “Unlock” button on the Display
Commander, inside the RV, must be pressed.
To Next Page
Loading...
