IN-COMMAND NCSP35CM - Passcode Management; Set Passcode Timer; Change Passcode; Clear Passcode

12
NCSP35CM
1. A passcode is required to access the system.
On the rst time use of the system, the user is required to enter
and conrm a new passcode.
• PASSCODE PROTECTION
• Text Editing*
• SETTINGS
1. Select “Settings”.
From the Menu screen you can:
• Connect devices with Bluetooth
• Connect DC to Wi-Fi
• Change the Passcode
• Customize the Floor Plan
• Edit iN-Command function text and reposition functions
• Customize Notications
• Touch Screen Calibration
• Control the Brightness of the DC screen
• View iN-Command’s Legal documents and customer support
information
• View the software versions
• Check status of Global Connect
• Change Date and Time
• Switch the Menu Language between English and French
The Administration page is used by the manufacturer.
When the “Panic” button is engaged from the DC Home Page or mobile
devices app, the Interior and Exterior lights will alternate cycling on and off.
Press the “Panic” button again to disengage the panic function.
• PANIC WARNING
Press and hold button for 3 seconds.