37
NCSP35CM
9. You can enter the account and Passcode manually.
(Note: The account information will automatically be pushed to
the DC from the mobile App when the account is created.)
In Settings, select the Global Connect Tab.
10. Enter the account and passcode that you created on the device app.
Press “Login”.
8. On the device, turn Bluetooth off. As long as you have internet
available through your device and iN-Command, the device app
will connect to iN-Command through Global Connect.
7. Press on the white bar next to “Passcode:” and use the device
keypad to enter a passcode for the account, then press the
“Register” button. After the account is registered, a notication
of “Register success” will appear. Press “Dismiss”.
The account & passcode will be pushed to the DC.
To Next Page
Loading...
Need help?
General
