When the power cable is damaged, it must be replaced by the manufacturer or else
by a qualied Service Centre.
Disconnect the appliance from the mains power supply immediately if you happen to
encounter any damaged electrical cables.
Wiring Diagram 12Vdc - 24Vdc
1. Electronic Control System Secop 12Vdc-24Vdc
2. Baery
3. Fuse BD35F/BD50F 15A (12V) – 7,5A (24V) BD80F 30A (12V) – 15A (24V)
4. Switch
5. Electric fan
6. LED diode
8. Motor speed seng resistance (table reference)
9. Baery protecon resistance (table reference)
10. Mechanical thermostat
11. Electronic thermostat (if present)
User Manual
78