Index G200 - Page 4

Service Interval - 2.000 Operating hours.............................................................................................................. 51
Maintenance Summary - 2.000 Operating hours...................................................................................................52
C010 - Check maintenance logs of servicing activities..........................................................................................53
C023 - Clean and check wipers of the work area door.......................................................................................... 54
C025 - Check work area door (with electr. drive) and window pane...................................................................... 57
C040 - Check and lubricate HSK clamping set (from Ott-Jakob)...........................................................................61
C047 - Check tool clamping sets of the milling spindles........................................................................................63
C050 - Check and potentially replace the cooling lubricant adapter (HSK tool mountings)................................... 66
C065 - Check telescopic covers and wipers..........................................................................................................68
C070 - Check outer wipers of linear guides...........................................................................................................69
C080 - Check all electrical connections and drive belts of the drive motors.......................................................... 70
C095 - Check slat/shingle cover on the telescopes (visual inspection)................................................................. 72
C130 - Replace filter on air conditioner cooling fan............................................................................................... 76
C140 - Check cooling unit for cooling lubricant......................................................................................................77
C165 - Check coolant............................................................................................................................................78
C190 - Clean labyrinth rings of spindles................................................................................................................ 80
C510 - Check backup data carrier.........................................................................................................................81
C525 - Check control cabinet................................................................................................................................ 82
C545 - Check cable and hose clamps for tight seating..........................................................................................83
C555 - Replace hydraulic fluid filters..................................................................................................................... 85
C570 - Wassermann tool change system.............................................................................................................. 88
C590 - Maintenance of turret steady rest SR2 or SLU X1 (by SMW).....................................................................89
Table of contents
II
Maintenance Instructions
G200.3 G220.3
DIE248EN - 15.08.2022